High Performance 12L/min 190GPH DC 24V Brushless Water Pump

Bulk Pricing:

Below are the available bulk discount rates for each individual item when you purchase a certain amount

  • Buy 5 - 9 and get 1.5% off
  • Buy 10 - 24 and get 3% off
  • Buy 25 - 49 and get 5% off
  • Buy 50 - 99 and get 7.5% off
  • Buy 100 - 499 and get 10% off
  • Buy 500 or above and get 15% off
(No reviews yet)
Current Stock:
Adding to cart… The item has been added

This is a high-performance DC submersible water pump with high-pressure output. It's built by a brushless motor so that it is very quiet and it lasts longer than a brushed water pump. Plus, it will not generate an 'electric spark' (noise) like a brushed type motor does.

Other applications: CO2 laser cooling, Indoor/Outdoor water fountain, Jet propulsion for Boat(toy) water gun, and other water circulation systems.

Ideal pump replacement for LightObject's Water chiller - 800W, 1600W Chillers!! Note: It is not a direct replacement as silicone water inlet might differ but power and pump pressure will be the same. A male to male barb may be needed. 


  • Power: DC24V
  • Output: 12.0L/m (190GPH) @24V
  • Pressure: 13 PSI
  • Vertical cutoff: 9m (30ft)
  • Shaft: Ceramic
  • Fin/blade: ABS
  • Intake/Outlet: PPE+20%GE
  • Body: Nylon
  • Current: 1.3A@24V  0.8A@12V
  • Intake: 18.0mm (0.7") Dia. the neck is 16mm. Inner Diameter is 12.5mm.
  • Outlet: 10.8mm (0.42") Dia. the neck is 9.7mm.
  • Life span: > 20,000hrs @ 6,800rpm~7,400rpm
  • Noise: << 40dB
  • Fluid temp: 50'C/122'F (max)
  • Envir Temp: <40'C/104'F
  • Size(L*W*D): 2.95"x1.84" (75mm X 46.8mm)
  • Weight (net): 7.0oz

Always keep water flowing - do not let it run dry!


To those who want to use it with a solar power battery, please make sure to install a 24V regulator as the output from a solar panel can be as high as 36V. Improper usage will void the warranty!

Manual is on the forum