Omicron G-series 2500x1300 8'x4' Flat Bed

Retail Price: $16,500.00
Price: $15950.00
  • SKULSR_LO251300S4

100W laser tube

     
 
- +

The G-series Omicron employs Gear-driven over belt-driven for a high precision cut. It is a professional grade cutting machine with the latest 4th generation DSP technology.  Moreover, on the Y-axis a dual Y motor is used to provide sufficient torque and power to drive a high power laser system on the gantry. 

The Omicron-G comes with the powerful and user-friendly software LightBurn that enables the user to get to work immediately after the machine is set up. If you need to handle more complicated, detailed artwork, our software is capable of integrating CorelDRAW, AutoCAD, Inkscape, and more.  By default, a 130 Watt Laser Tube is installed which is powerful enough to cut through 3/4” plywood!  What you see on the  LCD screen of the control panel is what you will get on your project.

The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.

 

Support: US Support Team

  •  On-site training for California Customers. Customer pay for travel expense:

                   

  • Free in-store training

                We will spend a whole day with you to show you how to use the software and teach you basic maintenance skills.

 

  • Unlimited tech support through email or forum



 The latest DSP controller card included
 

 

 

Shipping & Handling to US customers in 48 states that can range from $1300 to $2000. Check out our shipping estimator which will tell you the actual shipping cost to your location.  

Note: we only accept bank transfers and money orders. Full payment is required prior to shipment.

Return/Refund Policy is HERE

Specification:
CO2 Power:  Standard 100W laser tube; optional 130W or 260W upgrade available
Tube Trigger Volt: 28KV
Tube Operating Volt: 22KV
Operating voltage: AC 110V 12A, 50/60Hz or 200~220V, 6A, 50/60Hz (recommended for 130W or above)
Tube Current: 26~28mA (30mA max)
Max laser tube length: 70"(1778mm)
Working area: 2500mm x 1300mm (98.4"x 51")
Power Z table: Not supported
Precision: 0.05mm , resolution: 0.1mm
Speed: 600mm/s for X , 300mm/s for Y during engraving,
Wood cutting: up to 25mm (1"),  40mm acrylic with 100mm focus lens & 220W tube
Water Protection: Yes - Included!
DSP Controller: Comes with a LCD unit for motion control and power control
OS:  Windows 2000/XP/Vista/7/8/10 (32 bit/64 bit). Mac with optional Lightburn software
Interface: USB port and Ethernet (RJ45)
USB memory drive support: Yes
PPI support: Optional (controller dependency)
Micro step panning: Yes
Real time simulation: Yes
Cooling: Water Chiller LO-1600W (included)
Support: BMP,GIF,PCX,TGA,PLT,CDR,DXF,AI
Application supported:CorelDRAW X5,X6,X7,X8 AutoCAD 2004 or higher version, Inkscape and more!
Machine Dimension: 3277mm*2058mm*1118mm (129" x 81" x 44")
Shipping Dimension:3480mm*2260mm*1371mm (137" x 89" x 54")
Weight:1200Kg/2500lb
Write a Review