SPT C50 55W CO2 Sealed Laser TubeSPT
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 2 - 3 and get 5.5% off
- Buy 4 - 7 and get 7.5% off
- Buy 8 - 24 and get 10% off
- Buy 25 or above and get 15% off
**Free Shipping for Continental US Only**
SPT C50, 1000mm laser tube is a great candidate for industrial engraving and cutting leather, wood, and thin acrylic.
Note: This laser tube is not designed for the K40 machine which requires the 700~720mm CO2 Sealed Laser Tube instead.
Why SPT Laser
Why buy Laser Tubes from LightObject?
1) We're located in USA (Sacramento, California). No U.S. Customs issues
2) We provide great tech support. We are knowledgeable, and we know what we're selling. Check out our support forum at LightObject.info. There you can ask us questions, tap into our vast customer network for support and visit our FAQ section as well!
3) Fast turn around time for tube replacement
4) Competitive pricing because we deal directly with the manufacturers
5) High quality and professional packing
6) We test each tube with industry grade laser power meter before it is shipped from California
- Rated Power: 55W, Peak 60W
- Triggering Voltage: 16-18KV
- Operating Voltage: 15KV
- Max current: 18mA
- Recommend Working Current: 15~16mA, max 18mA, Peak 22mA
- Length: 1000mm (39.4")+/- 5mm
- Diameter: 50mm (2")+/- 1mm
- Water Temperature: 15~25'C(59-77F)
- Warranty: 9 months
Note: 600W water chiller with a compressor (refrigerant) is highly recommended for cooling.
The default shipping method is UPS ground. Please contact us for the price if faster service is needed.
Note: Shipping Rate provided by our system is applied to the continental 48 contiguous states in the USA. Hawaii, Alaska and rest of the world will be subjected to different shipping rate. Contact us to get a shipping rate before placing your order.
Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in the rejection of all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. We're not responsible for any internal cracked after receiving, any damage caused during transportation covered by insurance. The buyer is responsible for the shipping cost of a replacement tube if the order date is out of 30 days. Warranty acceptance or denial is subjected to the decision made by the tube manufacturers. Lightobject is not responsible for a denial under any circumstance.
I've wasted so much time in my life...
I've bought a few 35w tubes from Marco over the years for my Full Spectrum Pro 20x12 and Hobby 5th Gen and they have all been great. I decided to try to fit this tube into my Pro laser, and I'm blown away. My jobs used to have to run at 1000 dpi, half speed to get the depth I was needing. Put this one in, first job was at 500dpi, 80% speed and it's way too deep! I'm going to be saving probably an hour on my big jobs, which I run up to 10 hours a day. Chances are I'll be able to double my production with this thing. Wish I didn't wait years on this...
Review by Matthew on 9/18/2019
3 years and still working well
UPDATE: We've been running this tube in our Makerspace laser cutter for 3 years now. It gets heavy use and is still going strong. Highly recommende. We will definitely buy this tube again.
Review by Mike on 9/4/2019
Much nicer tube than stock, producing much more consistent beam and burns.
This is an awesome replacement for my previous tube (also purchased from Light Object). I love that it comes prewired. My previous tube did not, which wasn't a huge deal, but this makes it SO much easier!
The 50w SPT tube works way better than the original glass tube. Don't wait 2yrs to upgrade like I did. Tested and shipped out the next business day, packaged very well and at great price. Can't ask for more. Light Object is doing it right and has made a life long customer here. Thanks again!
works fantastic second one i had i burnt up the first one my fault no water best tube out there
I upgraded my Full Spectrum Hobby Gen5 from its normal 700mm (35W) tube to this baby. Excellent upgrade! Shipping was uber-fast. LightObject customer service actually answers the phone with a PERSON when you call. Packaging was terrific. I'll be purchasing more from LightObject. Highly recommended.
works great and arrived in good condition love it so far
Replaced my so called 45W Full Spectrum Laser tube with this one and it doubled my output. My laser has never cut wood this clean. Had to add a 12 inch extension to the side of the cabinet to fit this new tube which tells me I did not have a 40w laser. If you do this mod order 8X12 Silicone Flex Tube and a 30 mA meter. Runs great and time will tell how long it will last. Highly recommend this tube. 10/6/2020
I've bought a few 35w tubes from Marco over the years for my Full Spectrum Pro 20x12 and Hobby 5th Gen and they have all been great. I decided to try to fit this tube into my Pro laser, and I'm blown away. My jobs used to have to run at 1000 dpi, half speed to get the depth I was needing. Put this one in, first job was at 500dpi, 80% speed and it's way too deep! I'm going to be saving probably an hour on my big jobs, which I run up to 10 hours a day. Chances are I'll be able to double my production with this thing. Wish I didn't wait years on this...9/18/2019
UPDATE: We've been running this tube in our Makerspace laser cutter for 3 years now. It gets heavy use and is still going strong. Highly recommende. We will definitely buy this tube again.9/4/2019