Driving belt for the K40/D40 Series small laser machine. This belt replaces the X axis belt only.
Note: Please double check the width. Quantity is per foot, minimum purchase 5ft.
NEW!! 2022 Width measurement is 6mm. It will not fit old 5mm replacement belts. Modifications will be needed.
- Pitch: 2mm
- Width: 6.2mm
- Type: 9.5-MXL
- Suggestion: K40 needs at least 3ft for x-axis
Worked perfectly to replace the belt on my 4+ year old K40. Note the pitch on this belt is 2.032mm or 0.080in. The length of my stock belt was just over 3ft at 36-13/16" or 93.5cm. You can see here for a description on replacing the belt. https://forum.makerforums.info/t/replacing-k40-x-axis-belt/83529?u=nedman