SPT V26 200W CO2 Sealed Laser Tube
SPT
$3,450.00
$4,500.00
(You save
$1,050.00
)
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 2 - 3 and get 5% off
- Buy 4 - 7 and get 7.5% off
- Buy 8 - 24 and get 10% off
- Buy 25 or above and get 15% off
(No reviews yet)
Write a Review
SPT
SPT V26 200W CO2 Sealed Laser Tube
SPT V26 provides enough power to cut through 40mm acrylic or cut at high speed on metal or plywood.
This is an ideal tube for machine with limited space. It is also good for the 'Hybrid' laser machine to cut metal and non-metal.
*The power supply is included* 220V AC; standard 6 pin signal plug(H L WP G IN 5V)
Why SPT Laser
Specification
- Power: 220W
- Triggering Voltage: 55-57KV
- Current: 30mA, 35mA max
- Dual Power Supply included
- Power Supply dimension: 14" L x 9" W x 8" H
- Beam divergence: 3.1mrad
- Beam spot: 7.0mm
- Length: 1780mm (71") +/-5mm
- Diameter: 80mm (3.15") +/-1mm
- Water Cooling: two water inlets, two water outlets
- Water temperature: 15~25'C (59~77'F)
- Warranty: 10 months
*1600W or higher power with compressor (refrigerant) is required for cooling or warranty voided. Proof of owning a chiller is required or warranty voided.
Shipping
The default shipping method is UPS ground or freight.
Additional shipping cost will be charged outside the continental 48 states in the US. Please contact us for shipping cost before placing the order.
Courtesy reminder
Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in the rejection of all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. We're not responsible for any internal cracked after receiving, any damage caused during transportation covered by insurance. The buyer is responsible for the shipping cost of a replacement tube if the order date is out of 30 days. Warranty acceptance or denial is subjected to the decision made by the tube manufacturers. Lightobject is not responsible for a denial under any circumstance.
