High Quality JK 130W CO2 Sealed Laser Tube

**Free Shipping for Continental US Only**

LightObject is proudly partnered with JK Laser to be the distributor of GSI technology CO2 laser tubes in the United States. GSI tubes were highly regarded in the laser industry, offering exceptional reliability and beam diameter.

This JK 130-watt model laser tube is universal and can work with virtually any CO2 laser engraving/cutting machine, but is an ideal candidate for replacing a CO2 tube of similar power/length.

This high-output tube can handle up to 32mA at 26,000 volts. We recommend pairing this laser tube with our LightObject 1600-watt chiller to ensure ample cooling capacity.

This is an universal model and can work with almost all engraving/cutting laser units. It is a perfect replacement for the same power or length CO2 Laser tube. It is a great idea to use as an upgrade with a compatible power supply also.

Specification

• Power: 130W (150W peak)
• Triggering Voltage: 30KV
• Operating Voltage: 26KV
• Current:    26~30mA (32mA max)
• Length:    1700mm / 66.9 inches
• Diameter:  80mm / 3.15  inches
• Water Cooling (Proof of water chiller required)
• Triggering Current: 8mA (At which the laser beam is smooth, solid, and stable)
• Warranty: 14 months

Please note that proof of an 1000-watt (or higher) chiller is required for warranty purposes. LightObject is not responsible for damages caused due to negligence.

Shipping

This tube will be shipped via freight/UPS.

Note: Shipping Rate provided by our system is applied to the continental 48 contiguous states in the USA. Hawaii, Alaska and rest of the world will be subjected to different shipping rate. Contact us to get a shipping rate before placing your order. 

Courtesy reminder

Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in rejection on all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. The buyer is responsible for the shipping cost of a replacement tube if order date is out of 30 days. Warranty acceptance or denial is subjected to the decision made by manufacturers. Lightobject is not responsible for a denial under any circumstance.