High temperature(100C) DC 6V 1L/Min (15GPH) mini Water Pump. Food grade

SKU:
EWP-2502HT6V
$12.50
(No reviews yet)
Width:
2.00 (in)
Height:
1.00 (in)
Depth:
2.00 (in)
Current Stock:
92
Adding to cart… The item has been added

This is a high temperature (up to 105'C) food graded mini submersible water pump. The shaft is coated with a layer of ZrO2 (zirconium oxide) to withstand higher temperature and have better tolerance for acid and alkaline. It's built by a brushless motor to provide a smoother and quieter operation than a brush water pump. Also,it will not generate an 'electric spark' like what a brush type does, so it's safer.


Specification

  • Input: DC 5~6V
  • Output: 1.0L/min or 0.264 gallon/min
  • Cut-off: 1M (3ft ) @6V
  • Current: 300mA@6V
  • Intake outer diameter: 10mm or 0.39"
  • Outlet outer diameter: 7mm or 0.27"
  • Self-prime: No
  • Submersible: Yes
  • Life span: > 20,000hrs @ 1600rpm~4200rpm
  • Noise: << 20dB
  • Fluid Temp: 100'C/212F (non-submersed)
  • Ambient Temp: <50C/122F (submersed)
  • Size(L*W*D): 32mmx22mmx36mm (1.26" X 0.87" X 1.42")
  • Weight (net): 2.0oz

 
Suggestion Tubing for inlet:
12mm (ID 9mm) High Pressure Air/ Water flex tube (10ft)
8X12 Silicon Flex Tube for CO2 Water Cooling

Suggestion Tubing for Outlet:
5X8 Silicon Flex Tube for Air Assistance or Water Cooling 8mm (ID 5mm) High Pressure Air/ Water flex tube (10ft)

Note: Do NOT use the tubings above for drinking liquid because the tubings are not food grade tubing.


Warning:
Do not let it run dry without water flowing. To those who want to use it with a solar power battery, please make sure to install a 6V regulator as the output from a solar panel higher than 6V (as high as 9V) . Warranty will not cover the damage!

Manual is on the forum