X2700s 1790W Water Chiller with Dual Output & heater

This is our latest design with PID temperature controller. The LO-X2700s chiller is an ideal candidate for a laser machine running a laser tube with a power range from 130W to 300W.  It can handle two 150W tubes that are running simultaneously! The water temperature is maintained between 18°C - 25°C.

Highlight

• 20% cooling performance improvement
• Built-in digital controlled water heater
• Integrated temperature controller installed
• Better temperature control +/- 0.5'C 

Features

• Environment-friendly refrigerant R410A
• PID temperature controller
• Compact design
• Over-heat temperature and water flow alert

Specification

• Cooling Power: 1790W
• BTU: 7084Btu
• Power consumption: 950W
• Input power: AC 110V, 60Hz
• Full cooling power current: 9A
• Heater power: 500W
• refrigerant : R410A
• Pump power: 50W
• Pump lift (cut off) : 25m (80ft)
• Pump flow rate: 25L/min, 390GPH
• Suggested Inlet/Outlet Tubing: 8mmx12mm Silicone Tubing
• Silicone Tubing Included: No
• Ambient Temp: ≤35°C (95°F)
• Chilled Water Temp. 15~30°C(64.4~86°F)
• water reservoir: 9 Liter
• Chiller Dimension: 12.5" W x 20"D x 29" H
• Weight: 77lb
• Shipping Dimension: 15.25" W x 23.25" D x 34" H
• Crate Weight: 117lbs

Warranty - 12-month limited warranty from date of purchase. 

-Due to the weight of this product, it must be ordered individually and not combined with any other products.

Water Chiller shipped in a wooden crate.

Note: Shipping Rate provided by our system is applied to the continental 48 contiguous states in the USA. Hawaii, Alaska and rest of the world will be subjected to different shipping rate. Contact us to get a shipping rate before placing your order. 

Instruciton Manual

X2700s water chiller manual can be downloaded here.