SPT C50 50W CO2 Sealed Laser Tube

Retail Price $225.00
$205.00
(You save $20.00 )
(7) Write a Review
SKU:
LSR-SPT45WCO2
Bulk Pricing:
Buy in bulk and save

Product Description

SPT C50,  1000mm laser tube is a great candidate for industrial engraving and cutting leather, wood, and thin acrylic.

Note: This laser tube is not designed for the K40 machine which requires the 700~720mm CO2 Sealed Laser Tube instead.

Why SPT Laser

Click to know about SPT

Why buy Laser Tubes from LightObject?

1) We're located in USA (Sacramento, California). No U.S. Customs issues

2) We provide great tech support. We are knowledgeable, and we know what we're selling.  Check out our support forum at LightObject.info.  There you can ask us questions, tap into our vast customer network for support and visit our FAQ section as well!

3) Fast turn around time for tube replacement

4) Competitive pricing because we deal directly with the manufacturers

5) High quality and professional packing

6) We test each tube with industry grade laser power meter before it is shipped from California

Specifications

  • Rated Power: 50W
  • Triggering Voltage: 16-18KV
  • Operating Voltage: 15KV
  • Max current: 18mA
  • Recommend Working Current: 15~16mA;
  • Length: 1000mm (39.4")+/- 5mm
  • Diameter: 50mm (2")+/- 1mm
  • Water Temperature: 15~25'C(59-77F)
  • Warranty: 6 months

Note: 600W water chiller with a compressor (refrigerant) is highly recommended for cooling. 

Shipping

The default shipping method is UPS ground.  Please contact us for the price if faster service is needed.

Note: Shipping Rate provided by our system is applied to the continental 48 continguous states in the USA. Hawaii, Alaska and rest of the world will be subjected to different shipping rate. Contact us to get a shipping rate before placing your order. 

Courtesy reminder

Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in the rejection of all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. We're not responsible for any internal cracked after receiving, any damage caused during transportation covered by insurance.  The buyer is responsible for the shipping cost of a replacement tube if the order date is out of 30 days. Warranty acceptance or denial is subjected to the decision made by the tube manufacturers. Lightobject is not responsible for a denial under any circumstance.


I've wasted so much time in my life...

I've bought a few 35w tubes from Marco over the years for my Full Spectrum Pro 20x12 and Hobby 5th Gen and they have all been great. I decided to try to fit this tube into my Pro laser, and I'm blown away. My jobs used to have to run at 1000 dpi, half speed to get the depth I was needing. Put this one in, first job was at 500dpi, 80% speed and it's way too deep! I'm going to be saving probably an hour on my big jobs, which I run up to 10 hours a day. Chances are I'll be able to double my production with this thing. Wish I didn't wait years on this...

Review by Matthew on 9/18/2019


3 years and still working well

UPDATE: We've been running this tube in our Makerspace laser cutter for 3 years now. It gets heavy use and is still going strong. Highly recommende. We will definitely buy this tube again.

Review by Mike on 9/4/2019

Reviews

  • 5
    Superb upgrade, excellent quality

    Posted by Perry on Jun 1st 2021

    I upgraded my Full Spectrum Hobby Gen5 from its normal 700mm (35W) tube to this baby. Excellent upgrade! Shipping was uber-fast. LightObject customer service actually answers the phone with a PERSON when you call. Packaging was terrific. I'll be purchasing more from LightObject. Highly recommended.

  • 5
    50 watt laser tube

    Posted by jim on Mar 31st 2021

    works great and arrived in good condition love it so far

  • 5
    SPT 45W CO2 Sealed Laser Tube

    Posted by Richard on Feb 11th 2021

    Replaced my so called 45W Full Spectrum Laser tube with this one and it doubled my output. My laser has never cut wood this clean. Had to add a 12 inch extension to the side of the cabinet to fit this new tube which tells me I did not have a 40w laser. If you do this mod order 8X12 Silicone Flex Tube and a 30 mA meter. Runs great and time will tell how long it will last. Highly recommend this tube. 10/6/2020

  • 5
    I've wasted so much time in my life...

    Posted by Matthew on Feb 11th 2021

    I've bought a few 35w tubes from Marco over the years for my Full Spectrum Pro 20x12 and Hobby 5th Gen and they have all been great. I decided to try to fit this tube into my Pro laser, and I'm blown away. My jobs used to have to run at 1000 dpi, half speed to get the depth I was needing. Put this one in, first job was at 500dpi, 80% speed and it's way too deep! I'm going to be saving probably an hour on my big jobs, which I run up to 10 hours a day. Chances are I'll be able to double my production with this thing. Wish I didn't wait years on this...9/18/2019

  • 5
    3 years and still working well

    Posted by Mike on Feb 11th 2021

    UPDATE: We've been running this tube in our Makerspace laser cutter for 3 years now. It gets heavy use and is still going strong. Highly recommende. We will definitely buy this tube again.9/4/2019

  • 5
    45w laser tube

    Posted by Tim on Feb 11th 2021

    this tube is replacing a supposedly 40w tube (more like 25-30). this new tube performs much better than my old tube. Light Object has always been great to work with. had the new tube installed and running in about an hour.12/12/2018

  • 5
    Co-owner Devine Lasting Impressions

    Posted by Cristopher farrell on Feb 11th 2021

    This is the second time in 2 years that Light Object has rescued me. This time it was my tube that failed. My "Factory" 50 watt was actually a 40 watt being "Pushed" to higher output, therefore it failed early. These guys got me an "Honest" 45 watt tube that actually tested out to 57 watts!!! Running it at 16ma or less, this tube is giving me incredible performance at lower wattages and higher speeds. I'm able to cut thicker materials at 35 - 40% power, that I couldn't even cut before at 100%. Their friendly and helpful staff have once again got my business up and going in record time. I will be a customer for life.12/5/2018

Customers Also Viewed

Popular Trending Products

Lightobject Q600W mini Water chiller

LightObject

Retail Price $495.00
$445.00

LightObject LO-600W (AC110V 60Hz) Mini Water Chiller for Small CO2 Laser Machine or CNC Router. …