LightObject Industrial Water Chiller with Dual Output Q1600D

(1 review)
20.00 (in)
24.00 (in)
31.00 (in)
Current Stock:
Adding to cart… The item has been added

**Free Shipping for Continental US Only**

The 1600 chiller is an ideal candidate for a laser machine running a laser tube with a power range from 130W to 180W.  It can handle two 130W tubes that are running simultaneously! It is equipped with an easy to use controller.


  • Dual output for two laser tubes
  • 20% cooling performance improvement
  • Integrated temperature controller installed
  • Custom set high/low temperature alarm value
  • Better temperature control +/- 0.5'C 


  • Environment-friendly refrigerant R410A
  • Compact design with 0.1'C temperature accuracy
  • Compressor delay circuit, over-current protection
  • Over-heat temperature alert, water flow protection


  • Cooling Power: 1600W
  • BTU: 5084Btu/h
  • Input power: AC 110V, 60Hz
  • Current: 7.5A
  • Compressor power: 0.93HP, 680Watt
  • Refrigerant: R410A
  • Silicone Tubing Included: No
  • Male NPT Thread: ½ "
  • Pump lift (cut off) : 13m (42ft)
  • Pump flow rate: 23L/min, 360GPH
  • Inlet/Outlet size: 10mm
  • Suggested Inlet/Outlet tubing: 8mmx12mm Silicone Tubing
  • Recommended Ambient Temp: ≤35°C (95°F)
  • Chilled Water Temp.: 15°~32°C (59°F~90°F)  (min. 5°C without loaded)
  • Water tank capacity: 7L
  • Package Weight: 27KG (60lb)
  • Dimensions: W405×D470×H480mm (16" x 18.5" x 19") note: depth measured from blue cap

-Due to the weight of this product, it must be ordered individually and not combined with any other products.

Warranty - 2-Year limited warranty from date of purchase. 

Note:  Free Shipping Rate provided by our system is applied to the continental 48 contiguous states in the USA. Hawaii, Alaska and rest of the world will be subjected an additional different shipping rate. Contact us to get a shipping rate before placing your order. 


  • 5
    Wish I purchased sooner! 2x 55w CO2 Run all day now!

    Posted by Armando Araiza on Dec 26th 2023

    For the longest time I justified my "homemade" water chilling system. It would constantly give me errors and create more issues. One day I said ENOUGH and purchased the dual output water chiller from Light Object. It's been flawless engraving and water chilling since. I purchased 6 months ago and the machine runs and chills my 2x 55w CO2 machines flawlessly. This chiller allows me to keep our machines moving and my mind at ease. Don't wait as long as I did and thank me later!