Omicron 2500x1300 8'x4' Flat Bed

Retail Price: $16,500.00
Price: $15500.00
  • SKULSR_LO251300S4


- +


**Free LO-1600W water chiller!  Free extra lens set included!**


The LO-Omicron is a large, professional-grade engraving/cutting machine with the latest 4th generation DSP technology. The DSP controller supports up to 200 art files by uploading from a USB memory stick or any other USB device which saves time and the cost dedicated to a PC system solely for the machine.

An air cooling system is installed inside of the Omicron to improve performance. The laser head is installed on a roller wheel so higher speed can be attained.  

The LO-Omicron comes with the powerful and user-friendly software - RayCam v1.9 - which enables the user to get to work immediately after the machine is set up. If you need to handle more complicated, detailed artwork, our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features, the Omicron will engrave whatever you desire.  And the 130 Watt Laser Tube is powerful enough to cut through 1” plywood!  What you see on the  LCD screen of the control panel is what you will get on your project.

The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.


Support: US Support Team

  •  On-site training for California Customers. Customer pay for travel expense:


  • Free in-store training

                We will spend a whole day with you to show you how to use the software and teach you basic maintenance skills.


  • Unlimited tech support through email or forum

 The latest DSP controller card included



Shipping & Handling to US customers in 48 states that can range from $1300 to $2000. Check out our shipping estimator which will tell you the actual shipping cost to your location.  

Note: we only accept bank transfers and money orders. Full payment is required prior to shipment.

Return/Refund Policy is HERE

CO2 Power:  Standard 100W laser tube; optional 130W or 150W upgrade available
Tube Trigger Volt: 28KV
Tube Operating Volt: 22KV
Operating voltage: AC 110V 12A, 50/60Hz or 200~220V, 6A, 50/60Hz (recommended for 130W or above)
Tube Current: 26~28mA (30mA max)
Max laser tube length: 70"(1778mm)
Working area: 2500mm x 1300mm (98.4"x 51")
Power Z table: Not supported
Precision: 0.05mm , resolution: 0.1mm
Speed: 600mm/s for X , 300mm/s for Y during engraving,
Wood cutting: up to 25mm (1"), 20mm acrylic with 68.5mm or 75mm focus lens
Water Protection: Yes - Included!
DSP Controller: Comes with a LCD unit for motion control and power control
OS:  Windows 2000/XP/Vista/7/8/10 (32 bit/64 bit). Mac with optional Lightburn software
Interface: USB port and Ethernet (RJ45)
USB memory drive support: Yes
PPI support: Optional (controller dependency)
Micro step panning: Yes
Real time simulation: Yes
Cooling: Water Chiller LO-1600W (included)
Application supported:CorelDRAW X5,X6,X7,X8 AutoCAD 2004 or higher version, Inkscape and more!
Machine Dimension: 3277mm*2058mm*1118mm (129" x 81" x 44")
Shipping Dimension:3480mm*2260mm*1371mm (137" x 89" x 54")
Average rating 10 out of 10 ( based on 1 review )

Huge bed, fast cuts, easy to use. Great value!

Review by Skyline Workshop on 7/12/2016

We’ve had this laser cutter since March 2016 and it works great! It’s our 3rd CNC laser cutting machine from and we’re very satisfied. You can easily fit a full 4’x8’ sheet of material with lots of room to spare. The machine is huge but it has lots of power and works well with lots of materials. The dual 8” exhaust ports work to clear any smoke quickly. Our machine was configured with the X7 DSP and a 130w RECI tube. The staff at were extremely helpful in getting the machine set up, calibrated, and ready to cut. After some tuning, we were able to cut with high accuracy at over 75mm/s with a lot of direction changes. Even though the machine is really large, it still does a quality job of engraving details. We’re satisfied with the cut quality and overall build quality and ease of use. It’s a great machine that allows for a lot of cutting before material needs to be changed out.

Write a Review