The LO-Mirage is a professional grade engraving/cutting machine with the latest 4th generation DSP technology. Supports art files uploading from a USB memory stick or any other USB device which is very convenient because it saves time and the cost of a dedicated PC system for the machine.
An air cooling system is installed inside of the LO-Mirage to improve performance. The laser head is installed on a roller wheel so higher speed can be achieved.
The LO-Mirage comes with the powerful and user-friendly software that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed artwork our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features, the LO-Mirage will engrave/etch whatever you can dream up and the 60 (upgradeable to 80 watt!) Watt Laser Tube is powerful enough to cut through 1/2” plywood! What you see on the screen is what you will get from your project!
The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.
A quality made honeycomb flatbed allows for better heat release from the object
Shipping & Handling to US customers in 48 states range from $350 to $750 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location.
Note: we accept bank transfer or money order only. Full payment is required prior to shipment.
CO2 Power: 60W by default (Upgradeable to 80W laser tube)
Tube Trigger Voltage: 26KV
Tube Operating Voltage: 18KV
Max current for laser tube: 22mA
Laser tube Length: 1250mm (49.2")
Operating voltage: AC110V 60Hz (Optional AC 200~220V, 5A, 60Hz)
Working area: 600mm x 400mm(23.6" x 15.7")
Beam combiner built in (red dot laser):Yes
Power Z table: Yes
Precision: 0.01mm , resolution: 0.05mm
Speed: 750mm/s for X, 400mm/s for Y during engraving,
Engraving depth each pass:1mm for wood or 0.5mm for acrylic/plastic.
Woodcutting: up to 16mm (1/2")
Water Protection: Yes(not included - we recommend the LightObject Brand of Chillers)
DSP Controller: Comes with a LCD unit for motion control and power control
OS: Windows 2000/XP/Vista/7/8/10 (32 bit/ 64 bit). Mac with optional Lightburn software
Interface: USB port or Ethernet
USB memory drive support: Yes
PPI support: Yes
Micro step panning: Yes
Real time simulation: Yes
Cooling: Water Cooler(not included - we recommend the LightObject Brand of Chillers)
Application supported:CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more!
Machine Dimension( without extension case): 47"x 42"x 38"or 1194mm x 1167mm x 965mm
Machine Dimension( with extension case): 61" x 42x 38" or 1550mm x 1167mm x 965mm
Laser machine weight: 360lb, shipping weight: 480lb
Shipping Dimension: 53" x 46" x 42"
Warranty: 1 years for the machine. One year for the laser tube.
NOTE: Extension case is required and included for 60W tube and 80W tube configuration.